A.G.A - Lake Management - Oase Proficlear Filters

Oase Proficlear Modular Filters

The Oase Proficlear Modular Filter systems is simply just the best filter system available for Swim Ponds, recreational Ponds and large koi systems. The systems can be configured for either gravity of pumped feed to suit local conditions which will be specific to each individual installation. The modulat nature of the system allows out technical staff to design the most suitable and cost effective filtering solution to satisfy your requirement. Because the modular nature of the system allows such flexibility it is possible to design systems capable of treating large waterbodies such as those found on golf courses, reservoirs, ornamental ponds and zoological water bodies.

Gravity fed systems

Gravity fed system utilising bottom drain

The advantages of the Gravity feed system:

Effective removal of suspended matter, as the debris ends up in the coarse debris extractor module without pumping.
Lower energy consumption, as there is virtually no height differential and only low friction losses.
Easy to hide.
Simple extension to the system is possible.

Proficlear Filters Gravity Fed Configuration example 1:

Ponds without fish stock:	Ponds with low fish stock	Ponds with large fish stock (Koi ponds):
40 m²	20 m²	10 m²
max. flow rate 12,500 litres per hour

M2 – Extractor module
M3 – Filter foam module
M1 – Pump chamber

Proficlear Filters Gravity Fed Configuration example 2:

Ponds without fish stock:	Ponds with low fish stock	Ponds with large fish stock (Koi ponds):
80 m²	40 m²	20 m²
max. flow rate 12,500 litres per hour

M2 – Extractor module
M3 – Filter foam module
M4 – Bioballs filter module
M5 – Phosphate absorption module
M1 – Pump chamber

Pump fed system (pump could be located in pond)

The advantages of the pump feed system:

Can be easily retrofitted in existing ponds.
Minimum installation effort.
UVC devices can be simply pre-switched.
Simple extension to the system is possible.

Proficlear Filters Pump Fed configuration example 1:

M1 – Pump chamber
M2 – Extractor module
M3 – Filter foam module
M4 – Bioballs filter module
M5 – Phosphate binder module

Proficlear Filters Pump Fed configuration example 2:

1 x M1 – Pump chamber
2 x M2 – Extraction module
2 x M3 – Filter foam module
2 x M4 – Bioballs filter module
2 x M5 – Phosphate binder module

CALCULATION FOR THE CORRECT FILTRATION PUMP

1. Ponds without fish stock: pond volumes: turnover pond volume once every 8 hours (minimum)
2. Ponds with low fish stock:pond volumes: turnover pond volume once every 4 hours (minimum)
3. Ponds with large fish stock (Koi ponds):pond volumes: turnover pond volume once every 2 hours (minimum)

The filter elements M3-foam filter element and M4-Bioball-filter element can be interchanged as desired!

Pump fed system with pump located in pond

Pump fed system with pump located in pond

For more information on any of the Lake Management products or services, why not call one of our trained advisors on: Telephone: +44 (0)1953 886824 Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Last Updated on Tuesday, 06 October 2009 12:16